King Innovation Waterproof Medium Wire Connectors (100 ct.) | 61241

King Innovation Waterproof<br>Medium Wire Connectors<p>From dry to wet, above or below ground, this connector is optimal for direct bury applications operating at 30V or less. Impact-resistant and easy to install, this connector saves you time and money.</p>Features Benefits<ul><li>UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure</li><li>For use in Direct Bury applications when operating at 30V or less</li><li>Impact resistant</li><li>#1 in the industry</li><li>Waterproof and corrosion proof</li><li>One-step® installation saves time and money</li><li>No pre-twisting required</li><li>Pre-filled with dielectric silicone sealant that never hardens</li></ul>Product Specifications &amp; Measurements<ul><li>Max. Voltage: 600V max. building wire (1000V max. signs or luminaires)</li><li>Connector Size: 1 19/64" x 43/64"</li><li>Wire Type: Copper/Copper</li><li>Wire Range: Min #22/Max #8</li><li>Temperature Rating: 105°C (221°F)</li><li>Silicone Sealant: -45°F to 400°F</li><li>UL Designation: MWP</li></ul>Measurements<ul><li>A - 1.30"</li><li>B - 0.67"</li><li>C - 0.51"</li></ul>Installation Instructions<p>IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.</p><li>Strip wires 5/8" (15.9mm).</li><li>Align any frayed strands or conductors.</li><li>Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.</li><li>Twist connector onto wires pushing firmly until hand-tight. Do not over torque.</li><li>Wipe sealant in and around conductors and connector opening while tightening. Do not reuse.</li>